Eastwood welders: the current lineup, what each needs from your panel, and how the warranty works

Eastwood built its name selling restoration tools by catalog, and its welders follow the same model: sold direct, supported by phone, repaired by Eastwood. The machines publish most of what you need. The one gap matters for comparisons.

Eastwood publishes rated input current and breaker sizes for most of its welders, and covers its own machines for three years. Two cautions: none of its manuals states the temperature its duty cycles are rated at, so they do not compare directly with Lincoln or Miller, and warranty repairs are done only by Eastwood, with freight both ways at your cost.

Eastwood welders on paper

From Eastwood’s manuals and product pages, checked 2026-10-15. Input current is at rated output.

Model	Processes	Rated output, 240 V	Rated output, 120 V	Input current	Breaker and plug	Weight
MIG 180	Mig, flux core	180 A at 30%	90 A at 30%	29.6 A (240 V), 24 A (120 V)	30 A (240 V), 20 A (120 V); 6-50P, 5-15P adapter included	25.3 lb
MIG 250	Mig, flux core	250 A at 60%	80 A at 60%	46.2 A (240 V), 20 A (120 V)	50 A (240 V), 20 A (120 V); 6-50P	46 lb
Elite MP140i DC	Mig, DC tig, stick	120 V only	Mig 90 A at 30%	21.0 A max	Dedicated 20 A; 5-15P	33.7 lb
Elite MP200i DC	Mig, DC tig, stick	Mig 200 A at 15%	Mig 90 A at 40%	36.0 A max (240 V), 21.0 A (120 V)	50 A (240 V), 20 A (120 V); 6-50P	34.2 lb
Elite MP200i AC/DC	Mig, AC/DC tig, stick	Mig 200 A at 40%	Mig 80 A at 60%	Stick 40.0 A max (240 V)	50 A (240 V), dedicated 20 A (120 V); 6-50P	95.7 lb with cart
Elite MP250i DC	Mig, DC tig, stick	Mig 250 A at 60%	Mig 140 A at 60%	Stick 53.5 A (240 V), 51.1 A (120 V)	Dedicated 50 A (240 V) or 20 A (120 V); 6-50P	159.8 lb
TIG 220 AC/DC	AC/DC tig, stick	DC tig 220 A at 25%	DC tig 140 A at 25%	Stick 42.5 A max (120 V)	Not published	22.9 lb
Elite TIG 225 AC/DC	AC/DC tig, stick	Tig 225 A at 20%	Tig 120 A at 20%	Stick 42.5 A max (120 V)	50 A (240 V), 20 A (120 V); 6-50P	34.2 lb

Two numbers stand out. The Elite MP250i lists 51.1 amps of stick input on 120 volts against a 20 amp circuit, and the TIG 225 and TIG 220 list 42.5 amps on 120 volt stick. Those are input figures at full output, and both sit above the 20 amp circuit Eastwood specifies for 120 volts. How this meets your panel is in welder amp draw and what size breaker a welder needs.

No longer in Eastwood’s welder listing: the MIG 135, MIG 175, TIG 200 and the handheld Versa-Cut plasma cutters. Eastwood now also sells Rockwood and Woodward Fab machines; those are separate brands with their own, shorter warranties, and are not covered here.

Duty cycles with no temperature

Eastwood’s manuals define duty cycle as a percentage of a ten minute period, but none states the ambient temperature of the test. Lincoln, Miller and Hobart state 40 C (104 F), the international standard. A rating made in cooler air reads higher, so treat an Eastwood percentage as not directly comparable. Why that matters is in welder duty cycle.

Warranty and returns

From Eastwood’s customer service page and the warranty statement in its manuals, read 2026-10-15:

• Three years on Eastwood-branded welders, per the product pages and manual lists. Rockwood tools carry shorter cover.
• The clock starts on the date of delivery from Eastwood.
• RMA first. Call Eastwood for a return authorization before sending anything; Eastwood makes the final warranty call on welding and cutting equipment.
• You pay freight to and from Eastwood.
• Only Eastwood repairs count. Eastwood will not accept responsibility for repairs made elsewhere, and no third-party service network is published.
• Proof of purchase from Eastwood or an authorized Eastwood reseller. The warranty is non-transferable.
• Excluded: consumables unless defective, abuse, neglect and lack of maintenance.

Separately, most products carry a 90 day satisfaction guarantee, with a 10 percent restocking fee and return shipping at your cost. Eastwood also sells an extended service plan at checkout.

Source: Eastwood customer service, returns.

Support

Eastwood offers free lifetime tech support by phone on weekdays and by chat most days, publishes its manuals on each product page, and sells replacement parts for its welders online. It has four retail stores, in Illinois, Ohio, Maryland and Pennsylvania, which handle returns with a receipt; none is listed as a repair center. Country of manufacture is not published.

Buying from the right seller

Eastwood’s warranty needs proof of purchase from Eastwood or an authorized Eastwood reseller. Eastwood runs its own Amazon storefront, so check that the seller is Eastwood. These listings matched Eastwood’s model names when checked on 2026-10-15:

• Elite MP200i AC/DC
• Elite MP250i
• Elite TIG 225 AC/DC

Where Eastwood sits on this site

The MIG 180 appears in best mig welders and welders for auto body, and the Elite MP200i DC in best multiprocess welders. Eastwood’s arc spot weld gun is explained in spot welders. For brands with a dealer service network, compare Lincoln, Miller and Hobart; for another direct-sold brand, Everlast.